We use cookies and your data to present the best experience visiting our web site. To continue navigation on this web site, you accept that your data are collected.

Micro/Level® Elastomer Isolators 9 to 26 Series

Our 9 to 26 Series Micro/Level® Isolators are made from high-quality materials: ductile-iron support housings; high-strength steel bearing plates and leveling screws; and one piece, specially compounded, compression molded elastomers that last!

With load ratings to 135,000 lbs (600 kN) and natural frequencies as low as 10 Hz, these vertical leveling screw, elastomer isolators are very effective at isolating transmitted impact forces generated by stamping presses weighing as much as 450,000 lbs (2000 kN).

The horizontal properties of these vibration isolators are very effective in the anchorless installation of Die Cast Machines and Plastic Injection Molders.

Micro/Level Elastomer Isolators

Documentation

General Press Request for Quote Form General Press Request for Quote Form

Group Created with Sketch.

Request for quote form for general use small to medium (up to 500T capacity) presses running less than 250 SPM.

High Speed Press Request for Quote Form High Speed Press Request for Quote Form

Group Created with Sketch.

Use this form for presses running faster than 250 SPM.

Instructions for Preparation of Foundation and Machine Feet for Placement of Isolators M/L-646

Group Created with Sketch.

INSTRUCTIONS FOR PREPARATION OF FOUNDATION SURFACE AND MACHINE FEET FOR THE PLACEMENT POSITIONING AND ADJUSTMENT OF VIBRO/DYNAMICS® ISOLATORS

6-26 series screw chart 6-26 series screw chart

Group Created with Sketch.

Leveling Screws Lengths based on Foot thickness for Micro/Level 6-26 series. Leveling screw dimensional specifications.